I have a cogeco remote and i need to program it to get my sylvanna tv on video - One For All URC-3021 Remote Control question. Smart Notebook 10 Activation on this page. The remote control is universal, which means you can program it to operate your TV, DVD or other components. The ability to operate other components with a universal.

• Turn on your TV. • On your remote, press and hold SET until the LED blinks twice. • Point the remote at your device and enter a code assigned to your brand.

If done correctly and with a valid code, the LED will blink twice. Note: When an invalid code is entered, the LED will display one long blink and exit programming. To continue, repeat steps 2-3 with a valid code. • Verify that the correct code has been selected by pressing the POWER button. Your device should turn off.

If it doesn’t, repeat steps 2-4 trying each code for your brand until it does.

Has anyone successfully programmed the new remotes to use a 30s skip and 15s back? I've had my Motorolla box for a while and it was setup where 'A' was setup as a 30s skip and 'B' was setup as a 15s back. I just received my Pace box and I can't seem to program these features onto the remote.

It's a little bit different than my old remote as this one now has an On Demand button and the button placements are a little different. I've tried both 30s skip solutions and the 1 15s back solution, but none worked. I think I'm doing something wrong, so if anyone can confirm that this works or doesn't work it'd be appreciated. For 30-second skip: 1. Press the 'Cable' button at the top of the remote to put it into Cable Box control mode. Press and hold the 'Setup' button until the 'Cable' button blinks twice. Type in the code 994.

The 'Cable' button will blink twice. Press (do not hold) the 'Setup' button.

Type in the code 00173. Press whatever button you want to map the 30-second skip command to (ex: A / Lock). The 'Cable' button will blink twice if successful. For 15-second recall: 1. Press the 'Cable' button at the top of the remote to put it into Cable Box control mode. Press and hold the 'Setup' button until the 'Cable' button blinks twice.

Type in the code 994. The 'Cable' button will blink twice. Press (do not hold) the 'Setup' button. Type in the code 00179. Press whatever button you want to map the 15-second back command to (ex: A / Lock). The 'Cable' button will blink twice if successful.

These steps have worked for me on my new remote (Atlas M1056 Remote) with the Pace DVR. I do have the white On Demand button, so I have the M1056. Is there a way to totally wipe the device?

I tried 9-8-0, but that only wipes out custom programming and not devices as well. I have another remote, it also has the white On Demand button, and the 9-9-4 code worked fine. I think this remote I have is screwed up, so I'd like to try a factory reset and try again. If not, it may be broken. Edit: Forgot to add the cable unlock did not work. I successfully unlocked, tried the 9-9-4 and still no double-blink, just a paused-blink.

Cara Mendowload Nero 8. Same thing when I locked the cable button back up.